With its innovative heat-not-fire technology, IQOS has become a top-selling alternative to traditional tobacco cigarettes. It’s a novel kind of electronic cigarette that some claim is more effective than regular cigarettes. Tobacco is heated instead of burned, so fewer carcinogens and other harmful byproducts are emitted into the atmosphere.
The IQOS device uses its battery to function; one charge is sufficient for one cigarette and must be recharged using the included portable charger. However, IQOS, like any other smoking product, requires regular cleaning to maintain effectiveness.
How to Effectively Clean and Maintain IQOS?
Vegetable Glycerin (VG) and Propylene Glycol (PG) are the primary ingredients in the smoke oil used in IQOS Heatsticks and the e-liquid itself. Smoke oil is always left in the holder after heating since, in addition to the two liquid components of VG and PG, there is invariably a tiny amount of tar.
The original 2.4 Plus lacked a silicone ring, allowing smoke oil to leak into the holder. However, the new Protect Plus version, along with the fourth-generation IQOS 3 and IQOS 3 Multi, and the fifth-generation IQOS 3 DUO, has these rings.
Although it is unusual for the circuit board to get soaked in smoke oil, daily cleaning is recommended to prevent the buildup of smoke oil and the mingling of past heat stick odors. Regular cleaning reduces carbon deposits, the need to re-heat smoke oil, and the emission of unwanted chemicals.
After using the heat stick, remove any accumulated smoke oil using a dry cotton swab or paper towel.
Keep in mind that you should “dry first and then wet.” It’s best to use a dry paper towel or cotton swab to absorb the smoke oil before cleaning with an alcohol cotton swab. It will prevent the e-liquid from leaking.
You may use convenient paper towels for cotton swabs in numerous situations. If you find a single sheet of paper towel too thick to go inside the IQOS, try tearing it in half, folding out a triangle, and then rolling it into a strip.
A thorough cleaning is in order if the carbon buildup prevents adequate airflow through the heat stick. However, before inserting the cleaning tool, it is important to secure the heating blade with the IQOS anti-break blade to prevent it from breaking.
Data and experience from maintenance suggest that over 70% of heating blade breaks occur roughly when they are being cleaned.
Remove any lingering cigarette oil or tobacco with a cotton swab or paper towel before thoroughly cleaning. The significance of this cannot be overstated. When mixed with alcohol, smoke oil may easily slide into tiny crevices and even the charger if you don’t “dry first and then wet” before cleaning.
Cleaning with the IQOS Brush and the Cleaning Sticks
Your device comes with all the essentials in its IQOS cleaning kit. The brush and the cleaning sticks are essential for maintaining your IQOS device. Take off the holder’s lid and insert the brush into the space reserved for the HEETS. Please give it a few left and right turns to eliminate any lingering tobacco odor. One or two gentle twists in the same direction are generally sufficient. Please wait till the IQOS has cooled down before proceeding.
Tobacco residues from smoking over their expiration date may be removed with care using a cleaning stick. Use extreme caution and never use excessive force. Put forth some effort while you’re cleaning. You shouldn’t use vinegar or any other kind of cleaner on this. These are destructive to the heating element’s surface.
Cleaning The IQOS With Automatic Heating
Manufacturers of IQOS kits have included an automated cleaning mechanism to address the regular cleaning requirements. The charger itself has a dedicated button and light for this purpose.
The charger activates the heating element when you plug in your IQOS and click the button. The indicator turns off after the operation, but the holder’s battery still drains completely. The battery is recharged mechanically by the charger. It destroys any accumulated garbage and incomplete carbon deposits.
While this technique has its place, it simply cannot take the place of hand cleaning, which consistently produces superior results. They must be joined together.
Cleaning with IQOS Protective Anti-Break Rubber Pad
Two anti-break rubber pads (small and big) are inside the IQOS cleaning kit. The bigger one is for the IQOS 3/IQOS 3 DUO or IQOS 2.4 Plus, while the smaller one is for the IQOS 3 Multi since the Multi has a tiny inner diameter. Avoid breaking the IQOS 3 Multi holder while inserting the anti-break pad.
To avoid breaking the heated blade when cleaning, ensure the protective rubber pad is securely fastened before inserting a cotton swab or other cleaning equipment. If gaps remain, you may use the original protective pad with your IQOS 3 or put a tiny toothpick between the rubber pad and the device.
To disinfect the inside of your IQOS, use alcohol-soaked cotton swabs to wipe it off. First, use dry paper towels or cotton swabs to “suck dry” the smoke oil, then use a slightly moist 70 percent sterile alcohol cotton swab to gently clean the heating blade and the surrounding region, then dry promptly.
How Often Should IQOS Be Cleaned?
You can find out how frequently you need to clean your IQOS from the instructions. But remember that you need to do this at least once a week since few people read it until something breaks. If you use your device often, you should clean it frequently. Doing so will not damage the device and will extend its useful life.
What Happens If You Don’t Clean Your IQOS On Time?
Keeping your IQOS clean and in working order is essential for its safety and functionality. Regular cleaning of your IQOS is necessary to prevent residue and carbon from accumulating on the heating element, which may reduce performance. It might potentially lead to a fire. In addition, contamination of the air with the residue might lead to health problems for those with sensitive respiratory systems.
Cigarettes lose their original flavor if they aren’t cleaned regularly. The heater cannot heat tobacco to the proper temperature, yet the electronics will not let it fail. Due to this, IQOS uses more power, and its battery dies sooner. When the estimated puff time starts to shorten, it opens the door to various software malfunctions.
Any malfunctions might be brought on by dust and other debris that finds its way into the machine. In the case of IQOS, for instance, the device will cease charging while on the charger. If the heater becomes too hot, it might warp the machine’s internals or cause the electronics to malfunction.
Without routine maintenance, even seemingly straightforward equipment like an IQOS may spring many unexpected problems on its owner. It shortens the gadget’s useful life, so it might stop working.
Maintaining a clean IQOS device is necessary. It not only guarantees hygienic use but also extends the life of the device. If you have questions about its use and maintenance, contact Hif24 now.
